11/25/2023 0 Comments Buffalo ls220d goodsyncIf you can't get the NAS straightened out I would go with an HDD dock/enclosure and go that route if you don't want to spend the money for a descent NAS. If you went with an HDD dock/enclosure they have their own separate power source then you can plug it into your router using a USB port on the router (if your router has an available USB port). I have a NetGear router and the USB port on the back is designed to power a portable drive. I also have a portable 500GB Seagate Free Agent USB drive plugged directly into the back of my router as well, however, your router will need to have a USB port and be able to power a portable USB drive in order to do this, some cheap routers will not be able to provide the power needed to power the drive if you use a portable drive. I also have a Synology NAS (really expensive), both NAS are plugged directly into my router. I have the LinkStation Pro which I've had since 2012 (there is a new model of this NAS) and its fast using both wired and wireless connections. Also, their tech support center is US based and I wasn't on "eternal" hold. You will need the serial and model numbers which can be found on the NAS because they will ask for those. If don't have either of those you can use a search engine and find the number for Buffalo support. but the family access the NAS for storing from their tablets and phones.Īny ideas how to best network the 2TB drive?īuffalo has free 24/7 lifetime support for their products, if you still have the box or paperwork that came with it the 800 number for support is on both the box and paperwork. I am inclined to buy a USB 3 enclosure for the 2 TB HDD, and just be done with the NAS. Or.2) is there another way of networking the 2TB hard drive (NAS enclosures are silly expensive, and how can I ensure a decent transfer speed?). 1) is there anyway of improving the Buffalo transfer speed (I have looked at so many forums and have not found any useful advice). It wasn't until I networked my wife's PC and transferred files between our 2 PCs (win 7 64bit) that I realized that i could easily transfer data at 100Mb/s between PCs. I had always assumed that it was limited by my network. I have a Buffalo Link Station Live 2tb (used by whole family with tablets, PCs, phones for storage of pictures, videos etc etc etc). When configuring NFS shares to use as network sources for Kodi’s music/video libraries, use the following format: nfs://1.2.3.4/path/to/folder (where “1.2.3.4” should be replaced with the IP of your NFS server, and “/path/to/folder” should be replaced with the path to the folder you want to share a double slash between the server and the path is wrong, you should not use nfs://1.2.3.Please could some one advise. #mount IP-of-your-NFS-Server:/mnt/array1/share /mnt/mynfsshare/ You can try mount this NFS from ESXi or ubuntu server #apt-get install rpcbind nfs-common Restart services #/opt/etc/init.d/S55portmap restart ![]() Unfs3 - 0.9.22-1 - Version 3 NFS server (not recommended, use nfs-utils instead) ![]() Gain SSH and optware (check my previous post) So here’s the guide for NFS v3 on Buffalo Linkstation. So I just noticed that the previous method only support NFS v2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |